top of page

Embedded Systems at AEA

Embedded Systems (updated 08-2022) 

At AEA  (Alternative Energies Area) - UNPA, we have historically been working on the development of embedded systems, fundamentally focused on the measurements required in renewable energy equipment. Development work has included various types of systems: from the 8051 family (C2 - 1995), PC/104 (1999-2003), AVR and Cypress PSoC (2004 to present),  TSLinux (2008-2012), ARM-Cortex M4 (2017 to today), and covers local development boards in some cases and commercial board integration in most cases. A number of systems were developed in cooperation with UMAG (Chile) and UTN-FRRo (Rosario), in which commercial dataloggers such as Campbell Scientific CR850, CR1000 and CR1000X have been integrated, and access via TLS to a remote server was implemented using Raspberry Pi4B boards.

The cooperation with CERE/UMAG (University of Magallanes) in Campbell Scientific Dataloggers started in 2012 and has continued in various project as described in:

https://github.com/rafoliva/CERE-DataAcq

Building on this experience, AEA has developed on similar systems (a CR1000 acquired in 2013 via a PICTO-CIN Project) and the joint developments with OES-UTN (FRRo) since 2019 are described in:
https://github.com/rafaeloliva/AEA-DataAcq

​

Dagr+PhotosPresCASE2021_11-2021.jpg
ImplemPresCASE2021_11-2021.jpg
Presentation at UNPA UARG Informatics Conference 2021

​

Last 10/29/2021, a presentation was made at the "XVIII Jornadas de Informática UNPA/UARG" on the subject  "Web interface for CL2, EDU-CIAA and PIC embedded systems using ESP technologies", by Mg. Eng. Rafael Oliva,  Eng. Esp. Nestor Cortez 
of our Alternative Energies Area.

​

​

​

 

 

 

 

 

 

 

 

​

 

The contents treated were:

(Part 1)

• Web interface on the Internet – basic concepts and layer model 

• Use of ESP modules 
• Embedded systems – background 
• Possible connection configurations ESP-Embedded System 
• The Argentine Open Industrial Computer (CIAA) - Introduction 
• CL2, CL3 and PIC boards used 
• Communications introduction – UARG system with Raspberry Pi4B and conventional Datalogger


(2nd part) 

• Comparison with PLC / Ladder, common drives
• The connection of CIAA and EDU.CIAA with the outside world 
• Adaptation of Drivers in C for specific examples
• Electric motor drive EDU – CIAA + Alphanumeric display
• Prototype for the use of a poncho to drive an electric motor in rotation inversion.
• Prototype demonstration of XY positioning module
• Applications with Microchip microcontrollers
• Web interface - ESP modules
• ESP Connection - Embedded System
 
XVIII CONFERENCE ON INFORMATICS 2021 – UNPA / UARG - October 29, 2021 

Recording of the presentation JI2021 - Ing N.Cortez / Ing. R.Oliva

​

Download PDF Presentations - 1st Part - 2nd Part

 

 

ExhibitionNestor291021_EDUCIAA.jpg
bottom of page